Flic Cue, the AI voice button. Now Live on Kickstarter. Back it Now
 Butik 0
Butik
All 3D models
Official Flic models
For Buttons
For Twists
For Hubs
Official Flic models

Simplified outside-only models of Flic devices, for designing your own holders, mounts and enclosures. Units are millimetres, Z up. Use STEP for CAD and STL for quick viewing and printing. Allow 0.2 to 0.3 mm clearance where your mount fits around a device.

Flic 2 outer 3D model
Flic 2
Outer shape of the Flic 2 button.
  • Size: 34.3 mm diameter x 8.5 mm
  • Shape: round
STEP STL
Flic Twist outer 3D model
Flic Twist
Outer shape of the Flic Twist. The turning ring and centre button are separate bodies with their real gaps.
  • Size: 65.5 mm diameter x 20.9 mm, including rubber feet
  • Underside: battery hatch and open pocket for the wall mount
STEP STL
Flic Duo outer 3D model
Flic Duo / Cue / Mic
Outer shape of the housing shared by Flic Duo, Flic Cue and Flic Mic.
  • Size: 51.0 x 29.4 x 8.0 mm
  • Shape: pill, end radius 14.7 mm
  • Underside: 1.0 mm recess for the wall plate
STEP STL
Flic Duo wall plate 3D model
Flic Duo Wall Plate
The steel plate the Duo sticks to magnetically. Design your mount to carry this plate if it should hold the Duo magnetically.
  • Size: 42.3 x 27.5 x 0.8 mm
  • Fits: the recess on the Duo underside
STEP STL
Flic Hub LR outer 3D model
Flic Hub LR
Outer shape of the Flic Hub LR. All ports are on one end face, so leave room for cables and plugs.
  • Size: 86.0 x 66.0 x 12.5 mm
  • Overall: 86.75 x 66.0 x 12.7 mm with feet and LED light pipe
  • Ports: two round jacks, Ethernet, micro-USB
STEP STL
Flic Hub Mini outer 3D model
Flic Hub Mini
Outer shape of the Flic Hub Mini. Leave room for the USB-C plug and cable.
  • Size: 48.0 mm diameter x 12.8 mm, including rubber feet ring
  • Underside: USB-C port with cable channel
STEP STL
Flic button battery hatch opener 3D model
Battery Hatch Opener
Printable tool for opening the battery hatch on a Flic button.
  • Size: 26 x 65 x 42.75 mm
STL
Flic button lanyard grip 3D model
Button Lanyard Grip
Printable grip that holds a Flic button on a lanyard.
  • Size: 35.0 x 32.7 x 12.0 mm
STL
Flic Duo lanyard grip 3D model
Duo Lanyard Grip
Printable grip that holds a Flic Duo on a lanyard.
  • Size: 63.0 x 32.5 x 10.4 mm
STL
For Buttons
Flic Switch
Switch Holder Snap-In
Switch-style holder that a Flic or Flic 2 button snaps into.
Download here
Flic button wearable clip
Wearable Clip
Clip for wearing a Flic button. Heat the clip after printing and bend it into shape.
Download here
Flic holder for trombone
Trombone Holder
Holder for mounting a Flic button on a Bach 42 trombone.
Download here
Neck-worn Flic button case
Neck-Worn Case
Two-part case for wearing a Flic button around the neck, with a tool for battery access.
Download here
Flic 2 lanyard holder
Lanyard Holder
Holds a Flic 2 button securely on a lace or lanyard.
Download here
Multi-button holder for Flic 2
Multi-Button Holder
Holder for two, three or four Flic 2 buttons.
Download here
Gen Base for CR2032 Battery
Adapter for using a CR2032 battery instead of a CR2016. Easier assembly and disassembly.
Download here
Button Clip Trumpet
Clip-on holder for mounting a Flic button on a trombone.
Download here
Gridfinity Mount
A Tinkercad-designed mount for attaching Flic buttons to Gridfinity grids.
Download here
Battery Hatch Opener
Tool for easily loosening stuck Flic buttons during battery replacement.
Download here
Button Extender
A little button, to make pressing a flic button a easier.
Download here
Switch Holder
Print both files, insert the Flic button, and slide the back on. It fits like a light switch, keeping your button safe!
Download here
Switch Mount
A light switch cover holding a Flic button, with access to the original switch and minimal support needed.
Download here
Triple Pocket Holder
A pocket clip holder for three Flic 2 buttons, enabling one-handed control for EUC World app while riding.
Download here
Magnetic Keychain
A 3D-printed stand and holder for Flic 2 buttons, perfect for easy access and organization.
Download here
Magnetic Tray
Magnetic Tray designed for 1/4” x 1/16” circular magnets. Secure with superglue, sticky tack, or clay.
Download here
Magnetic Mount
A simple bin for a single Flic button.
Download here
Panic Button Holder
Large Flic button holder, perfect for easy use by kids or seniors.
Download here
Shell Repair Kit
Keychain for the Flic button.
Download here
Apple TV Remote
Remote with Flic button for sleep timers, integrated with Alexa and Harmony.
Download here
For Twists
Twist Desk Stand
Stand for Flic Twist, usable with or without magnets, or both.
Download here
For Hubs
Flic Hub wall mount
Hub Wall Mount
Wall mount for the Flic Hub that leaves the ports unblocked.
Download here
Flic Hub Mini magnetic bracket
Hub Mini Magnetic Bracket
Mounts a Flic Hub Mini on a fridge or other magnetic surface. Uses two 8 x 5 mm magnets.
Download here